The Bed side and portable monitor of the IM8 series is a compact device for use in a Surgery, ICU, Recovery room, Emergency Unit, CCU Unit, Pediatric Units, and wherever it is required to monitor heart and hemodynamic parameters in a patient as well as cases of transmission Patient within and outside the Hospital.
The IM8 series operates at 220V / 50Hz but also with rechargeable batteries lasting up to 4.5 hours.
It is light weight, 5 kg (320 x 150 x 265 mm), with a special handle and carry case for easy transport.
It has a special filter so it is not affected by surgical diathermy currents.
The IM8 series has a high-resolution color display depending on the model.
The IM8 model has 12.1-inch display, the IM8 A model has 10.4-inch display and the model IM8B has 10.1-inch display.
The IM8 series is capable of displaying up to 8 waveforms and all numerical values of the monitored vital parameters.
Its handling is particularly simple and is mostly done with the KNOB rotary knob and logic menu.
Receiving the ECG is made through a flexible, mechanically resistant 3-pole and 5-pole cable with the possibility of removable terminals. It has a digital heart rate display of 15 to 300 bpm. It has adjustable audio-visual alarms. It has the capability of simultaneously displaying one or two ECG leads as well as the display of all seven leads in the case of 5lead cable. In the event that one of the leads is switched off, the monitor automatically selects another lead so that ECG waveform monitoring is not lost on the screen.
Measure and display the breathing waveform using the ECG cable and measuring range from 0 to 120 breaths per minute. For adults, 0 to 150 breath per minute. For neonatal and pediatric use and adjustable audio-visual alarm. For adults and children it is automatically done while for newborns based on special neonatal software that is integrated into the basic composition of the monitor.
It digitally depicts systolic, diastolic and mean blood pressure with the oscillometric method and digitally depicts systolic, diastolic and mean arterial pressure. It has the ability to measure adults, children and newborns.
Manually retrieving STAT and automatically at user-specified intervals, activated by the operator at will, has an adjustable audio-visual alarm. It also has a security system from the overpressure of the cuff.
Bloodless method from the patient’s finger. It depicts the hemoglobin saturation curve with a digital indication of% O2 saturation in the blood of 0 to 100%. It also shows the heart rate from 30 to 254 bpm.
Measurement is done using the Absorption – Spectrothotometry method.
It also has adjustable audio-visual alarms.
It is capable of measuring two temperatures as well as measuring and indicating the difference.
It has adjustable audio-visual alarms and receives body and esophageal sensors.
Bloody pressures are obtained through multi-use or single-use special transducers. The measuring range is from -50 to 300 mmHg, and can also be measured in kPa units.
It depicts common pressure waveforms with simultaneous indication of systolic, diastolic and mean pressure.
It has the ability to measure two (2) bloating pressures.
It has adjustable audio-visual alarms.
With the EtCO2 booster that features both the side stream and the mainstream method for intubated and non-patients.
The measurement of CO2 is done with a special double-wavelength infrared radiation sensor. Monitor displays inhalation and end-expiratory dioxide, breathing frequency and waveforms.
In addition, it also receives a built-in three-channel logger to record alarms either at the operator’s request. It records this in addition to waveforms and past time points, TRENDS, and so on.
It has Trends of 1 to 96 hours as well as past time points for all monitored parameters displayed on the screen without missing the measured parameters and all waveforms of the monitored patient. It also has a special panel for the last 500 measurements of blood pressure and storage of up to 60 episodes and 120 seconds. Full
Disclosure.
Performs ST analysis in two leads for cardiac arrhythmia analysis.
The IM8 Series features FREEZE of on-screen waveforms.
There are 3 categories, a medical alarm with different sound depending on the criticality of each parameter, as well as technical alarms.
The IM8 series is connected via an Ethernet network with a central station with two-way communication. It has bed-to-bed monitoring capability allowing monitoring of vital signs, waveforms and alarm of any patient.
The IM8 series is designed to meet international safety and performance standards and has CE as required.
